ELECTRICALLY-POWERED SEWAGE MACERATOR PUMP WASTER WATER PUMP
PRODUCT DESCRIPTION
FL-65B 24v dc macerator is designed specifically for the marine environment with run dry premium impeller technology. Capable of 13 gpm, the macerator also features a high-quality motor with new seamless shell, splash-proof design and rear o-ring shaft seal. New innovative blade design ensures problem free pumping. The inlet port has both a 1.5" hose barb and 1.5" male thread to screw directly onto a tank flange. Has a 1' outlet barb.
The powerful STARFLO Macerator FL-65B is compact, making it perfect for tight spaces in RVs, boats and campers. Customers will come to appreciate the performance this system delivers. The twin stainless steel blades and high performance impeller materials allow the STARFLO to empty a 20-gallon holding tank in about 2 minutes. Other design features include abusive duty cycles, intermittent dry running, self-priming, and thermal protection.
New STARFLO self-priming macerator waste pump with fully-sealed motor and heavy-duty chopper blade. It is ideal for emptying marine holding tanks, evacuating fish box and livewell tanks, and transferring waste between holding tanks.
FEATURES
- Fully-sealed permanent magnet motor with run-dry protection and powder-coated housing
- Self-priming to 5 feet
- Heavy duty four-bladed chopper
- 13 GPM flow rate - Will empty a typical 30 gallon holding tank in less than 3 minutes (duty cycle is 15 minutes)
- Nitrile compound impeller
- Stainless steel cutter reduces particle size to 1/8" (3mm) maximum
- Lip type seal
- ISO 8846 marine ignition protection
- Type: Macerating flexible impeller
- Water Flow: 13gpm
- Macerates: Yes
- Material: Nylon body, nitrile impeller, stainless wear plate
- Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb
- Dimensions: 3-3/8"H x 4-5/8"W x 11"L
- Innovative blade design ensures problem-free pumping
- Inlet port has both a 1.5" hose barb and male thread
- Draw: 12V model: 9A; 24V model: 6A
SPECIFICATION
Liquid Temperature: 140°F (60°C) Max.
Priming Capabilities: Not needed flooded suction
Power: 9 amps max current draw
Max Pressure:Not needed
Inlet/Outlet Ports:1.5” (39mm) quick connector or thread fitting
Weight: 4.9 lbs (2.24 kg)
Motor
Type : High quality seamless design that is thermally protected
Leads :Wire leads
Temperature Limits:140°F (60°C)
TECHNICAL DATA
Model | Volts(V) | Open Flow gpm(lpm) | Amps Max | Packing Size(mm) | N.W/G.W(kg) |
FL-65A | 12V dc | 12.0(45.0) | 9.0 | 320*135*110 | 2.1/2.4 |
FL-65B | 24v dc | 12.0(45.0) | 6.0 | 320*135*110 | 2.1/2.4 |
TYPICAL APPLICATIONS :RV INDUSTRY AND AGRICULTURE