750GPH Automatic Bilge Pump For Boat STARFLO 750GPH automatic bilge pump with float switch, it not required any float switch when use. Also the pump turns on when water level rise & shuts off when is removed. The bilge pump typically used in boat hulls / bilges, bait tanks, ponds, pools, spas and other applications where you have to remove water from. Note: These pumps are designed for intermittent use only, NOT designed for continuous use Note: Bilge and aerator pumps must be lower than the source of water for priming TECHNICAL DATA FOR BILGE PUMP  THE DIMENSION FOR 750GPH BILGE PUMP COMPOSITION DETAILS FOR THE PUMP Sample order is very welcome to have a test, if need more technical specification, pls send email to us !

12V 24V  Portable Bilge Pump For Boat TECHNICAL DATA FOR BILGE PUMP FEATURES AND BENEFITS Pump turns on when water level rises & shuts off when water is removed Water cooled motors for long life, with anti airlock design and moisture tight seals. Output: Up to 12.5 gallons/minute(750 gallons/hour). Max. recommended discharge head 2.5m. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies. Includes comprehensive user manual with installation instructions and wiring diagram Snap-off strainer for easy cleaning Connections: For 19mm (3/4") bore hose. Totally submersible and ignition protected. Compact pump for smaller vessels. Tough plastic body. Limited one year warranty Can be used with switch panel for manual override Includes comprehensive user manual with installation instructions and wiring diagram PUMP PUMP Liquid Temperature 110°F (43°C) Max Priming Capabilities Not needed flooded suction Power 3.0 amps max current draw Max.Pressure Not needed Motor Type Compact, efficient, long life motor Leads 18 AWG, 1 m long Leads Temperature Limits 110°F (43°C) Max. Duty Cycle Intermittent Voltage 12v/24v DIMENSION FOR BILGE PUMP Sample order is very welcome to have a test, if need more technical specification, pls send email to us !

12V DC Submersible Bilge Pump TECHNICAL DATA STARFLO Pumps submersible 12 Volt DC manual and automatic bilge water pumps have been the industry's standard for decades.  The 12 volt automatic computerized sump pumps are used to drain pools, pool covers, basements, garages, utility rooms, sumps, boats and other utility applications. It provides outstanding quality and value. It is economically prices and designed for small boats.  It features an easy clean snap lock strainer, silent and vibrationless operation, anti-airlock protection, compact, efficient long life motor, marine grade blocked wiring, ignition protection,  no burn-out when run dry and rust and corrosion protection, it is the popular choice for boat owners alike. FEATURES FOR MANUAL BILGE PUMP 1. Pump and switch are stand alone products 2. Compact, efficient, long life motors 3. New mercury free float switches 4. Volt: 12 and 24 volt versions 5. Easy clean snap-lock strainer bases 6. Anti-Airlock protection 7 .Exclusive moisture tight seals 8. Completely submersible 9 . Marine grade blocked wiring 10. Silent and vibrationless operation DIMENSION DRAWING FOR BILGE PUMP Sample order is very welcome to have a test, if need more technical specification, pls send email to us !

New 1100GPH Automatic Bilge Pumps For Small Boats TECHNICAL DATA Model Flow Rate Volts Current Head Wire Outled Dia SFBPG1100-12 1100GPH 12V 3.8A 5.0M 100CM 29MM SFBPG1100-24 1100GPH 24V 2.0A 5.0M 100CM 29MM DESCRIPTION The STARFLO submersible auto bilge pumps are equipped with built in electronic controlled reed sensor system to make fully automatic operation easy. No separate float switch is needed and relay loop design protect the pump against instant high current. No power use until pump turns on when water rises. (Auto bilge pump) All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing. High Flow: for use from 22lpm to 234lpm (1.32-14.04 cubic meters / hour) Small size, high efficiency, low current to achieve a small size perfect combination of high flow Totally submersible and ignition protected with anti airlock design and moisture tight seals. To all existing safety standard. Snap-lock strainer base for easy installation and removal and silent vibration free running. Run dry with no problem How A Bilge Pump Works Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris.  Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install.  Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe  navigational conditions.