12V Small Automatic Bilge Pump For Boat 
	
 
	All-in-one pump & float switch. No additional float switch required. Pump turns on when water level rises & shuts off when water is removed. 
	
	
 
	  
	DETAILS OF THE BILGE PUMP 
 
	
		
			| 
					
						All-in-one pump & switch - No float switch required 
					
						Pump turns on when water level rises & shuts off when water is removed 
					
						Water cooled motors for long life, with anti airlock design and moisture tight seals. 
					
						Output: Up to 12.5 gallons/minute(750 gallons/hour). Max. recommended discharge head 2.5m. 
					
						Heavy duty motors with stainless steel shafts and tough thermoplastic bodies. 
					
						Includes comprehensive user manual with installation instructions and wiring diagram 
					
						Snap-off strainer for easy cleaning 
					
						Connections: For 19mm (3/4") bore hose. 
					
						Totally submersible and ignition protected. 
					
						Compact pump for smaller vessels. 
					
						Tough plastic body. 
					
						Limited one year warranty 
					
						Can be used with switch panel for manual override 
					
						Includes comprehensive user manual with installation instructions and wiring diaphragm 
					 
					 Typically used in boat hulls / bilges
						
							
								| 
										APPLICATION OF AUTOMATIC BILGE PUMP 
									 | 
					
 
					
						Bait tanks 
					
						Ponds, pools, spas 
					
						Other applications where you have to remove water from 
					
						Note: These pumps are designed for intermittent use only, NOT designed for continuous use 
					
						Note: Bilge and aerator pumps must be lower than the source of water for priming 
					 
					
 | 
	
	 
 
	IMAGE GALLERY 
	
 
	Sample order is very welcome to have a test, if need more technical specification, pls send email to us !