banner10
Latest Products
  • accumulator pressure tank

    STARFLO 0.75 Liters Marine RV Water Pump And Accumulator Tank System

    STARFLO 0.75L Solar Pressurized Accumulator Tank For RV Marine  FEATURES & BENEFITS •  Smoother flow, quieter water systems •  Internal rubber membrane eliminates maintenance and allows universal mounting. •  Better control of hot water temperatures •  Simply fitted to new or existing systems •  Longer pump life, lower battery drain •  Snap-in port fittings •  Port Size:1/2” MNPT inlet and outlet ports • Application: RV, Boat,Marine SPECIFICATION OF WATER ACCUMULATOR TANK: Model Internal VoluInme Pre-charge Pressure Max Operating Pressure Air Fill Valve SFAT-125-075 0.75 L 23.5 OZ 10 PSI 0.7 BAR 125 PSI 8.6 BAR standard automotive style tire valve Read More +
  •  Accumulator Tank

    STARFLO 0.75L Solar Pressurized Accumulator Tank For RV Marine

    STARFLO 0.75L Solar Pressurized Accumulator Tank For RV Marine Read More +
Search
  • Automatic Bilge Pump 600GPH 12V DC bilge pump
    Marine Self-priming Bilge Pump MORE FEATURES FOR AUTOMATIC BILGE PUMP All-in-one pump & switch - No float switch required Pump turns on when water level rises & shuts off when water is removed Water cooled motors for long life, with anti airlock design and moisture tight seals. Output: Up to 12.5 gallons/minute(750 gallons/hour). Max. recommended discharge head 2.5m. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies. Includes comprehensive user manual with installation instructions and wiring diagram Snap-off strainer for easy cleaning Connections: For 19mm (3/4") bore hose for 600GPH &750GPH,  29mm hore hose for 1100GPH Totally submersible and ignition protected. Compact pump for smaller vessels. Tough plastic body. Limited one year warranty Can be used with switch panel for manual override Includes comprehensive user manual with installation instructions and wiring diagram MORE APPLICATION Typically used in boat hulls / bilges Bait tanks Ponds, pools, spas Other applications where you have to remove water from Note: These pumps are designed for intermittent use only, NOT designed for continuous use Note: Bilge and aerator pumps must be lower than the source of water for priming TECHNICAL DATA DIMENSION DRAWING Sample order is very welcome to have a test, if need more technical specification, pls send email to us !
    Read More
  • 600GPH 12V DC Marine Automatic Pump rule bilge pump
    600GPH 12V DC Boat Bilge Pump MORE FEATURES Heavy duty motors with stainless steel shafts and tough thermoplastic bodies. Totally submersible and ignition protected. To all existing safety standards. Water cooled motors for long life, with anti airlock design and moisture tight seals. Snap-lock strainer base for easy installation and removal, and silent vibration free running Includes comprehensive user manual with installation instructions and wiring diagram PRODUCT DESCRIPTION STARFLO self-priming bilge pump All-in-one pump & float switch. No additional float switch required. Pump turns on  when water level rises & shuts off when water is removed. With the good quality and the convenient potable, STARFLO bilge pump major export to USA, Netherland , Australia market . TECHNICAL DATA DIMENSION DRAWING OF MARINE BILGE PUMP HOW AN AUTOMATIC BILGE PUMP WORK ?  Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller  in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps,  submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. Bilge pumps are designed to  exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage,  and/or other unsafe navigational conditions.
    Read More
  • 1100GPH 12V DC Marine Automatic Bilge Pump For Boat Bilge Pump Automatic Float Switch
    New 1100GPH Automatic Bilge Pumps For Small Boats TECHNICAL DATA Model Flow Rate Volts Current Head Wire Outled Dia SFBPG1100-12 1100GPH 12V 3.8A 5.0M 100CM 29MM SFBPG1100-24 1100GPH 24V 2.0A 5.0M 100CM 29MM DESCRIPTION The STARFLO submersible auto bilge pumps are equipped with built in electronic controlled reed sensor system to make fully automatic operation easy. No separate float switch is needed and relay loop design protect the pump against instant high current. No power use until pump turns on when water rises. (Auto bilge pump) All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing. High Flow: for use from 22lpm to 234lpm (1.32-14.04 cubic meters / hour) Small size, high efficiency, low current to achieve a small size perfect combination of high flow Totally submersible and ignition protected with anti airlock design and moisture tight seals. To all existing safety standard. Snap-lock strainer base for easy installation and removal and silent vibration free running. Run dry with no problem How A Bilge Pump Works Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris.  Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install.  Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe  navigational conditions.
    Read More

Copyright © 2015-2024 Xiamen Starflo Industry and Trade Co., Ltd.

top

Online Now

Close

Online Now